Recent Publications*: Grad students &: Undergraduates 2005 38.) SR Trenor*, TE Long, and BJ Love, Crystallization of Photo-Chain Extended Poly(ethylene glycol), European Polymer J, 41, 219-224 (2005) (JCR Factor 1.086) 37.) SR Trenor*, TE Long and BJ Love, The Development of a Light Deactivatable PSA Via Photodimerization, Journal of Adhesion, 81, 213-229 (2005)
36.) DM Esterly* and BJ Love, “Phase Transformations of Poly(vinylidene Fluoride) by Ball Milling”, J Polym Phys., Polym Phys Ed., 42(1), 91-97 (2004). (JCR Factor: 1.221) 35.) BJ Love, “Analytical Model Development for Stokes-Type Settling in a Solidifying Fluid”, accepted Particulate Science and Technology, 22, 185-190 (2004). (JCR Factor: 0.390) 34.) SR Trenor*, TE Long and BJ Love, “Photoreversible Chain Extension of Polyethylene Glycol”, Macromolecular Chemistry and Physics, 205, 715-723 (2004). (JCR Factor: 1.359). 33.) SR Trenor*, AR Schultz, BJ Love and TE Long, “Coumarins in Polymers: From Light Harvesting to Photoreversible Tissue Engineering Scaffolds”, Chemical Reviews, 104, 3059-3077 (2004). (JCR Factor: 20.993) 32.) AE Suggs* PI Dolez, and BJ Love, “The Adaptation of Acrylic Photopolymerized Resins as Model Bone Cements in Total Hip Arthroplasties”, , Journal of Adhesion Science and Technology, 18(10), 1091-1102, (2004). (JCR Factor: 0.852) 31.) ML Jackson*, and BJ Love, Analysis of Dicyandamide Precipitation in Epoxy Solutions and Latex Dispersions Using a Two-Stage Drying Model, accepted Polymer., 45(21), 7229-7238 (2004) (JCR Factor 2.34) 2003 30.) PI Dolez, C Williams&, A Goff& & BJ Love, “Properties of Photopolymerizable Acrylic Adhesives for Underwater Bonding”, J Society for Underwater Technology, 25 (4), 199-208 (2003). 29) JD Maciborski&, PI Dolez and BJ Love, “Construction of Iso-concentration Sedimentation Velocities Using Z-axis Translating Laser Light Scattering”, Materials Science and Engineering A, 361, 392-396, (2003). (JCR Factor 1.107) 28.) ED Suloff, JE Marcy, DR Brooks*, and BJ Love, “Preparation of Polymeric Stationary Phase for Use in Inverse Gas Chromatography”, Polymer-Plastics Technology and Engineering, 42(5), 959-970 (2003). (JCR Factor 0.514) 2002 27.) S Subrahmanyan*, JG Dillard, M Romand, M Charbonnier and BJ Love, “The Transience of Plasma Surface Modification as an Adhesion Promoter for Polychlorotrifluoroethylene”, J Vacuum Science and Technology 73, 707-713 (2002). (JCR Factor 1.301) 26.) PI Dolez, A Goff& and BJ Love, “Settling Behavior of Specific Acrylic Particles in BisGMA Based Reactive Slurries”, Separation Science and Technology 37(9), 2007-2019 (2002). (JCR Factor: 0.779) 25.) PI Dolez and BJ Love, “Chemical Cleaning for Barnacle-Covered Surfaces”, Int J Adhesion and Adhesives 22, 297-301(2002). (JCR Factor: 0.857) 24.) DL Hoffman&, DR Brooks*, PI Dolez and BJ Love, “Design of a Z-axis Translating Laser Light Scattering Device for Particulate Settling in Dispersed Fluids”, Review of Scientific Instruments, 73(6), 2479-2482 (2002). (JCR Factor: 1.437) 23.) SR Trenor*, AE Suggs*, and BJ Love, “An Examination of Transdermal Drug Delivery Using a Model Polyisobutylene Pressure Sensitive Adhesive”, J Materials Science Letters, 21, 1321-1323 (2002). (JCR Factor 0.504) 2001 22.) J Cotton, JW Grant, MK Jensen*, & BJ Love, “Analytical Solutions to the Shear Strength of Interfaces Failing Under Flexure Conditions”, Int J Adhesion Adhesives, 21, 65-70 (2001). (JCR Factor: 0.660) 21.) SR Trenor*, KM Renshaw&, M Marek&, KE Forsten and BJ Love, “Influence of Surface Chemistry on Particle-Particle Aggregation as Measured by a Coulter Counter in the Low Concentration Regime”, J Adhesion Science and Technology, 15(10), 1189-1198 (2001). (JCR Factor; 0.798) 20.) PI Dolez, M Marek& and BJ Love, “Photopolymerizable Acrylic Resin: Effect of Curing Time and Temperature”, J Applied Polymer Science, 82, 546-554 (2001). (JCR Factor 0.992) 2000 19.) BJ Love & KE Forsten, “A Particle Adhesion Perspective of Metastasis”, Invited paper for J Adhesion, 74, 1-18 (2000). (JCR Factor: 0.728) 18.) MJ Freeman*, MJ Furey, BJ Love and JM Hampton&, “Friction, Wear, and Lubrication of Hydrogels As Synthetic Cartilage”, Wear, 241, 129-135 (2000). (JCR Factor: 0.698) 17.) MK Jensen*, BJ Love, JW Grant, J Cotton, JR Keiser, and DF Wilson, “Comparison Study of Dicyandiamide-Cured Epoxy Bonded Steel Joints and Polyamidoamine-Cured Epoxy Bonded Steel Joints”, Int J Adhesion Adhesives, 20, 437-444 (2000). (JCR Factor: 0.554) 1999 16.) VM Vaubert*, PC Moon & BJ Love, “Extractable Free Monomers from Self-Cured Dental Sealants”, J Biomedical Materials Research, 48, 5-8 (1999). (JCR Factor 2.038) 15.) ML Jackson*, BJ Love & SR Hebner&, “Effects of Environmental Exposure on Solvent- and Water-Based Epoxy Systems”, J Materials Science, Materials in Electronics, 10, 71-79 (1999). (JCR Factor 0.417) 14.) BJ Love, J Baborowski, M Charbonnier, and M Romand, “Surface Chemical Characterization of Copper Oxide and Its Relationship to Adhesion in Formed Epoxy/Copper Interfaces”, J Adhesion, 69, 165-179 (1999). (JCR Factor: 0.866) 1998 13.) BJ Love, KE Cherry&, JL Longhenry*, NS Murthy & C Bednarczyk, “Transcrystallinty at Interior Boundaries in Multilayer Crystalline PCTFE Films”, J Materials Science Letters, 17, 1681-1683 (1998). (JCR Factor: 0.349) 12.) BJ Love & PF Packman, “The Contributions of Morphological and Surface Chemical Modifications to the Elevated Temperature Aging of Copper-Epoxy Interfaces”, J Materials Science, 33, 1359-1367 (1998). (JCR Factor: 0.632) 11.) J Baborowski, BJ Love M Romand, and M Charbonnier, “Etude par Emission de Rayons X de Films D’Oxyde de Cuivre Formes sur des Substrats de Cuivre”, J de Physique, Pr.5., 287-294 (1998). (JCR Factor: 0.291) Pre1998 10.) JL Longhenry*, BJ Love & NS Murthy, “Cooling rate-induced glass Adhesion Variations Using Crystallizing Hot-Melt Adhesives”, J Materials Science, 32, 2283-2289 (1997). (JCR Factor: 0.632) 9.) J Medding& and BJ Love, “Evaluation of Collisional Impact in Polystyrene Foam Constructions Using a Dual Hammer Impact Test”, Polymer Engineering and Science, 36(9), 1286-1289 (1996). (JCR Factor: 0.890) 8.) PF Williams, GL Powell, BJ Love, K Ishihara, N Nakabayashi, R Johnson & M Laberge, “Fabrication and Characterization of Dipalmitoylphosphadycholine Attracting Material for Joint Replacement”, Biomaterials, 16, 1169-1174 (1995). (JCR Factor: 3.008) 7.) TG Wilson, BJ Love & CH Smith, “Clinical Effectiveness of Fluoride Releasing Elastomers II, Enamel Microhardness Levels”, American J Orthodontics and Dentofacial Orthopaedics, 107(4), 379-381 (1995). (JCR Factor 0.732) 6.) BJ Love, KE Starling, Jr. & TV Baughn, “Controlling Adhesion of Orthodontic Adhesives Through Adjustment of the Interphase Mechanical Properties”, J Adhesion, 45, 149-159 (1994). (JCR Factor: 0.559) 5.) RS Pilcher, BJ Love and WC Hutton, JR, “The Effects of Sterilization on the Properties of UHMWPE”, Southern Orthopaedic J 3(1), 27-33 (1994). 4.) BJ Love and KE Starling Jr., “Orthodontic Adhesive Modification to Enhance Post-Treatment Removal”, J Clinical Orthodontics, 27(6), 319-322 (1993). 3.) BJ Love, “Discussion of ‘Properties of PVB Interlayer Used in Laminated Glass’”, J Materials in Civil Engineering, 5, 546 (1993). (JCR Factor: 0.346) 2.) BJ Love and PF Packman, “Effects of Surface Modification on the Peel Strength of Copper Based Polymer-Metal Interfaces with Characteristic Morphologies”, J Adhesion, 40, 139-149 (1993). (JCR Factor 0.559) 1.) BJ Love, “Surface Analysis Preparations for Multilayer Plated Through Holes”, Surface and Interface Analysis”, 14, 794-795 (1989). (JCR Factor: 1.071)
Last Updated, June 21, 2005 |