New Page 1

Newbury, K.M., Leo, D.J., 2001, “Mechanical work and electromechanical coupling in ionic polymer bender actuators,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, paper number AD-23705.
Mallavarapu, K.., Leo, D.J., 2001, “Feedback control of the resonant modes in the bending response of ionic polymer bender actuators,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, paper number AD-23732.
Farinholt, K.M.*, Leo, D.J., 2001, "Active acoustic control of conical bores through actuating boundary conditions," Proceedings of the ASME International Mechanical Engineering Congress and Exposition, paper number NCA-23537.

Back to Directory Back to Home Page

International Conference on Adaptive Structures Technology

- October, 2001

1. Bennett, M.*, Leo, D.J., 2001, “Manufacture of ionic polymer actuators using non-precious metal electrodes,” to appear, International Conference on Adaptive Structures Technology.

2. Newbury, K.M.*, Leo, D.J., 2001, “Chemoelectric and electromechanical coupling in ionic polymer materials,” to appear, Proceedings of the International Conference on Adaptive Structures Technology, October.

Back to Directory Back to Home Page

ASME Design Engineering Technical Conference - September, 2001

Farinholt, K.M.*, Leo, D.J., 2001, “Acoustic control modeling of conical bores with actuating boundary conditions,” Proceedings of the ASME Design Engineering Technical Conference, Paper Number VIB-21480.

Back to Directory Back to Home Page

SPIE Smart Materials and Structures - March, 2001

1. Lindner, D., Vujic, N.*, Leo, D.J., 2001, “Comparison of drive amplifiers for piezoelectric actuators,” SPIE Paper No. 4332-33.

2. Mallavarapu, K.*, Newbury, K.M.*, Leo, D.J., 2001, “Feedback control of the bending response of ionic polymer metal composite actuators,” SPIE Paper No. 4329-40.

3. Nasser, K.*, Vujic, N.*, Leo, D.J., Cudney, H.H., 2001, “Modeling and testing of a piezohydraulic actuation system,” SPIE Paper No. 4327-45.

4. Malowicki, M.*, Leo, D.J., “Piezoelectric isolation system for lightweight automotive seats,” SPIE Paper No. 4331-15.

Back to Directory Back to Home Page

ASME International Mechanical Engineering Congress and Exposition

Adaptive Structures and Materials Symposium - November, 2000

1. Nasser, K,*, Leo, D.J., 2000, “Efficiency of frequency-rectified piezohydraulic and piezopneumatic actuation,” Proceedings of the Adaptive Structures and Materials Symposium, ASME vol. AD-60, pp. 485- 498.

2. McEver, M.*, Leo, D.J., 2000, “Autonomous vibration suppression using on-line pole-zero identification,” Proceedings of the Adaptive Structures and Materials Symposium, ASME vol. AD-60, pp. 407 - 416.

3. Chandrasekarn, S., Lindner, D., Leo, D.J., 2000, “Effect of feedback control on the power consumption of induced-strain actuators,” Proceedings of the Adaptive Structures and Materials Symposium, ASME vol. AD-60, pp. 65-76.

4. Griffin, S., Lane, S., Leo, D.J., 2000, “Power consumption for active acoustic control of launch vehicle payload fairings,” Proceedings of the Adaptive Structures and Materials Symposium, ASME vol. AD-60, pp. 85-94.

Back to Directory Back to Home Page

AIAA Structures, Structural Dynamics, and Materials Conference - April, 2000

1. Newbury, K.*, Leo, D.J., 2000, “Structural dynamics of grid stiffened plates incorporating piezoceramic sensors and actuators”, AIAA Paper Number 2000-1496.

Back to Directory Back to Home Page

SPIE Smart Materials and Structures - March, 2000

1. Leo, D.J., Austin, E., and Beattie, C., 2000, “Constrained substructure approach to optimal strain energy analysis,” SPIE Paper Number 3989-15.

2. Leo, D.J., 2000, “Air flow control of miniature fuel cell systems,” to appear in the Proceedings of the SPIE, Newport Beach, CA, SPIE Paper Number 3985-83.

3. Nasser, K.*, Leo, D.J., and Cudney, H.H., 2000, “Compact piezohydraulic actuation system,” to appear in the Proceedings of the SPIE, Newport Beach, CA, SPIE Paper Number 3991-41.

Back to Directory Back to Home Page

ASME International Mechanical Engineering Congress and Exposition

Adaptive Structures and Materials Symposium - November, 1999

1. Leo, D.J., 1999, “Energy analysis of piezoelectric-actuated structures driven by linear amplifiers,” Proceedings of the Adaptive Structures and Materials Symposium, ASME AD-vol. 59, November, Nashville, TN, pp. 1-10.

2. Leo, D.J., 1999, “Efficient actuation utilizing fuel cell power sources,” Proceedings of the Adaptive Structures and Materials Symposium, ASME AD-vol. 59, November, Nashville, TN, pp. 133-141.

Back to Directory Back to Home Page